Enviko CET-8311 Piezo Traffic Sensor

 Enviko CET-8311 Piezo Traffic Sensor


The CET-8311 Piezo Traffic Sensor is a high-performance device designed for collecting traffic data. Whether installed permanently or temporarily, the CET-8311 can be flexibly installed on or below the road, providing accurate traffic information. Its unique structure and flat design allow it to conform to the road profile, reduce road noise, and improve the accuracy and reliability of data collection.

Two types for CET-8311 Piezo Traffic Sensor:

Class I (Weigh In Motion, WIM): Used for dynamic weighing applications, with an output consistency of ±7%, suitable for applications requiring high-precision weight data. 

Class II (Classification): Used for vehicle counting, classification, and speed detection, with an output consistency of ±20%. It is more economical and suitable for high-traffic management applications.

Main Features of CET-8311 Piezo Traffic Sensor

1.         Fully enclosed, no electronic components, material generates electricity under impact.

2.         Excellent performance in dynamic measurements, detecting single-axle information in real time, with accurate separation of continuous axle loads.

3.         Simple installation with minimal road damage, requiring a trench of 20×30 mm.

4.         Integrated with the road, unaffected by rain, snow, ice, or frost, with no maintenance required.

5.         Installed flush with the road surface, ensuring smooth passage for vehicles.

6.         Parallel processing with the sensor and processing module, ensuring fast data handling.

7.         The sensor is embedded into the road and ground down to remain flush with the road surface. The sensor processing module operates in parallel, allowing for fast data processing without missed or false detections. The sensor accurately captures electrical signals over long distances.

8.         Effectively isolates horizontal pressure, ensuring accurate vertical force detection.

9.         Long life, no external protection needed, capable of withstanding over 40 million axle passes.

10.     Suitable for wide lanes.

11.     Adapts to road surface changes without affecting data analysis.

The Main Parameters of CET-8311 Piezo Traffic Sensor

Output Uniformity 

±20% for Class II (Classification)

±7% for Class I (Weigh in Motion)

Operating Temperature Range

-40℃～85℃；

Temperature Sensitivity

0.2%/℃；

Typical Output Level

At 25ºC, using 250mm*6.3mm rubber head, pressing 500KG force, peak output 11-13V

Piezoelectric Coefficient

22 pC/N

Center Core

16 gauge, flat, braided, silver plated copper wire

Piezoelectric Material

Spiral-wrapped PVDF Piezoelectric film

Outer Sheath

0.4mm thick brass

Passive Signal Cable

RG58A/U, using high-density polyethylene sheath, can be directly buried; outer diameter 4mm, rated capacitance 132pF/m 

Product Life

>40 to 100 million axle times

Capacitance

3.3m,40m cable,18.5nF

Insulation Resistance

DC 500V >2,000MΩ

Packaging

Sensors are packaged 2 per box (520×520×145mm paper box)

Installation Brackets 

Includes brackets. One bracket per 150mm

Sensor Dimensions

1.6mm*6.3mm, ±1.5%

Installation Slot Size

20mm×30mm

 

Enviko Technology Co.,Ltd

E-mail: info@enviko-tech.com

https://www.envikotech.com

Chengdu Office: No. 2004, Unit 1, Building 2, No. 158, Tianfu 4th Street, Hi-tech Zone, Chengdu

Hong Kong Office: 8F, Cheung Wang Building, 251 San Wui Street, Hong Kong

 




Comments

Post a Comment

Popular posts from this blog

Improved Installation Scheme for Piezoelectric Quartz Weighing Sensors on Asphalt Pavement

Image
  1. Background Technology   Currently, WIM systems based on piezoelectric quartz weighing sensors are widely used in projects such as overload monitoring for bridges and culverts, non-site overload enforcement for highway freight vehicles, and technological overload control. However, to ensure accuracy and service life, such projects require cement concrete pavement reconstruction for the piezoelectric quartz weighing sensor installation area with the current technology level. But in some application environments, such as bridge decks or urban trunk roads with heavy traffic pressure (where the cement curing time is too long, making long-term road closures difficult), such projects are difficult to implement.   The reason piezoelectric quartz weighing sensors cannot be directly installed on flexible pavement is: As shown in Figure 1, when the wheel (especially under heavy load) travels on the flexible pavement, the road surface will have a relatively large subsidence. How...
Read more

Enviko CET8312 Piezoelectric Quartz Dynamic Weighing Sensor

Image
1.    Summary CET8312 Piezoelectric Quartz Dynamic Weighing Sensor has the characteristics of wide measuring range, good long-term stability, good repeatability, high measurement precision and high response frequency, so it is especially suitable for dynamic weighing detection. It is a rigid, strip dynamic weighing sensor based on piezoelectric principle and patented structure. It is composed of piezoelectric quartz crystal sheet, electrode plate and special beam bearing device. Divided into 1-meter, 1.5-meter, 1.75-meter, 2-meter size specifications, can be combined into a variety of dimensions of road traffic sensors, can adapt to the dynamic weighing needs of the road surface.   2.    Picture of CET8312 3.    Technical Parameters Cross section dimensions ( 48mm+58mm ) *58 mm Sensor Length 1m / 1.5m / 1.75m / 2m Cable length From 25m to 100m ...
Read more

Enviko CET8312-A Quartz Sensor for Weigh-In-Motion (WIM)

Image
  CET8312-A Quartz Sensor for Weigh-In-Motion (WIM) The CET8312-A is Enviko's latest generation of dynamic quartz sensors, offering exceptional performance and reliable quality. Its linear output, repeatability, easy calibration, stable operation in a fully sealed structure, and absence of mechanical movement or wear make it an ideal choice for transportation weighing applications. Key Features: High Accuracy: Individual sensor consistency accuracy is better than 1%, and the deviation between sensors is less than 2%. Durability: Waterproof, dustproof, rugged, and corrosion-resistant; wide temperature and humidity adaptation range; no need for frequent calibration and maintenance. Reliability: High insulation resistance can withstand a 2500V high-voltage test, extending sensor service life. Flexibility: Customizable sensor length to meet various needs; data cable is resistant to EMI interference. Environmental Friendliness: Uses environmentally friendly materials and complies with...
Read more