Implementation of WlM for Direct Weight Enforcement

 




Comments

Post a Comment

Popular posts from this blog

Enviko weigh-in-motion (WIM) solutions

Image
  Enviko weigh-in-motion (WIM) solutions Mainly consists of quartz crystal sensors, a charge amplifier, a weighing controller, a front-end processing unit, dynamic weighing management software, and power supply equipment. When a vehicle passes through the dynamic weighing system, the sensors collect waveform data. The charge amplifier (data acquisition unit) captures, converts, and amplifies the signal, while the weighing controller calculates and generates the vehicle's weight data. The weighing system can monitor all vehicles passing through the weighing area without affecting normal traffic. By combining license plate and vehicle type information with preset overload standards in the processing unit, it automatically identifies overloaded vehicles. Operating 24/7, the system continuously detects vehicle information such as axle count, axle weight, and gross weight, and determines overload status based on the latest regulations. The system also includes a speed detection functio...
Read more

Comparison of Key Features of Weigh-In-Motion Sensors

Image
The three mainstream types of Weigh-In-Motion (WIM) sensors ： Quartz (Enviko and others), Plate Type, and Strip Strain Gauge, each have their own characteristics. Below is a comparative analysis of their features.   Quartz Piezoelectric sensors use the piezoelectric effect, offering high-frequency response, a wide measurement range, compact size, easy installation, and no power supply requirement. They work well for speeds from 1-200 km/h, have excellent long-term stability, low maintenance costs, and a lifespan of 5-10 years. Plate Type sensors use strain resistance technology and are suitable for low-speed (0-40 km/h) or static weighing. Accuracy decreases above 30 km/h. Installation requires a large foundation pit, leading to long construction times, significant traffic disruption, high maintenance costs, and a short lifespan of 1-3 years. Strip Strain Gauge sensors are designed for medium to low-speed weighing (1-60 km/h) but become less accurate above 40 km/h. Installa...
Read more

Enviko CET8312-A Quartz Sensor for Weigh-In-Motion (WIM)

Image
  CET8312-A Quartz Sensor for Weigh-In-Motion (WIM) The CET8312-A is Enviko's latest generation of dynamic quartz sensors, offering exceptional performance and reliable quality. Its linear output, repeatability, easy calibration, stable operation in a fully sealed structure, and absence of mechanical movement or wear make it an ideal choice for transportation weighing applications. Key Features: High Accuracy: Individual sensor consistency accuracy is better than 1%, and the deviation between sensors is less than 2%. Durability: Waterproof, dustproof, rugged, and corrosion-resistant; wide temperature and humidity adaptation range; no need for frequent calibration and maintenance. Reliability: High insulation resistance can withstand a 2500V high-voltage test, extending sensor service life. Flexibility: Customizable sensor length to meet various needs; data cable is resistant to EMI interference. Environmental Friendliness: Uses environmentally friendly materials and complies with...
Read more